CE Standard portable fire extinguisher 5kg ABC powder 65% fire extinguisher
5KG Fire extinguisher
40% ABC dry powder
Outer diameter: 150mm
Cylinder length: 420mm
Working pressure: 14bar
Test pressure: 25bar
Fire class: 13A & 70B C
Burst Pressure: 100Bar
Our main prouducts :
1. DCP Fire Extinguisher
2. CO2 Fire Extinguisher
3. Car Fire Extinguisher
4. Automatic Fire Extinguishers
5. Water-based fire Extinguisher
6. Foam Extinguisher
7. Fire Extinguisher Cylinder
8. Dry Chemical Powder
9. Fire extinguisher Accessories
10. Pressure Gauge
11. Personal Protection
12. Fire Fighting Equipment
1, How can I get prices?
Send us your enquiry by either email or fax, we will make you offer soon.
Also, let me know the destination port so that we can advise you shipping cost accordingly.
2, How to assure the quality ?
Firstly, all of our materials and components pass the serious China Quality Standard and Control.
Secondly, all of our finished products should pass Asenware Quality Check System before export.
Thirdly, our products can be provided to test and cetify by Authories according to customer's special need.
3, Can I order some samples before placing batch order and how do you ship them?
Small sample order is acceptable, subject to our final confirmation.
Also, you're kindly requested to pay extra handling cost per small order.
Normally, we can send the samples to you by courier or by air
4, How long does it take to deliver your goods?
Normally, we will effect shipment within 45 days after receipt of 30% deposit.
Transit time depends on your destination port.
Fire Extinguishers For Class A Fires
What type of materials would be burning for a fire to be classified as a Class A fire?
Wood ORDINARY COMBUSTIBLES
What type is labeled for Class A fires?
The Air Pressurized Water (APW) is labeled a Class A extinguisher. It contains water which is one of the most commonly used extinguishing agents for fires involving ordinary combustibles.
What does this type look like?
They can be recognized by their large silver container. They stand about three feet in height and weigh about 25 lbs. when full.
What are the components in an APW fire extinguisher?
Two thirds of the container is filled with water and the remainder is pressurized air.
How is a fire extinguished with this type?
Fire is extinguished by cooling the surface of the fuel to remove the HEAT element of the fire.
Are there any recommendations for the placement of these units in a workplace or public area?
The National Fire Protection Agency (NFPA) does recommend that offices, classrooms and assembly halls that mainly contain Type A combustible materials have one 2:A extinguisher for every three thousand square feet. For workers protection in the workplace, OSHA requires that all employees have access to a one within seventy five feet of travel distance.
What type of fires should never be extinguished with an Air Pressurized Water (APW) fire extinguisher?
Flammable liquid fires and electrical fires should never be extinguished with an air pressured water extinguisher. A flammable liquid fire could spread and an electrocution could occur if water is used to extinguish an electrical fire. Also, never use this type on a deep fat fryer fire in a commercial kitchen. An explosive type reaction could result.
Company: YUYAO JINQIANG FIRE FIGHTING EQUIPMENT FACTORY
Add: Huajia Village,Huangjiabu Town,Yuyao City,Zhejiang Province ,China
Sales manager: Amy Fu
How to use fire extinguisher ?