Payment & Shipping Terms:
|Name ::||Foam Fire Extinguisher||Color::||Red|
|Delivery Time::||20 -25 Days||Spare Parts::||Valve,nozzle ,cylinder Etc|
|Test Pressure::||27bar||Material::||Carbon Steel|
Safety Fire Extinguisher,
AFFF Fire Extinguisher
4-12 L foam fire extinguisher cylinder with foot ring apply for class AB
6ltr Foam Fire Extinguisher
Fire extinguishers can be heavy, so it's a good idea to practice picking up and holding an extinguisher to get an idea of the weight and feel.
Take time to read the operating instructions and warnings found on the fire extinguisher label. Not all fire extinguishers look alike.
Practice releasing the discharge hose or horn and aiming it at the base of an imagined fire. Do not pull the pin or squeeze the lever. This will break the extinguisher seal and cause it to lose pressure.
When it is time to use the extinguisher on a fire, just remember PASS!
Pull the pin.
Aim the nozzle or hose at the base of the fire from the recommended safe distance.
Squeeze the operating lever to discharge the fire extinguishing agent.
Starting at the recommended distance, Sweep the nozzle or hose from side to side until the fire is out. Move forward or around the fire area as the fire diminishes. Watch the area in case of re-ignition.
|Fires involving solids and burning liquids, such as paint and petrol but not suitable for chip or fat pan fires. Safe on fires caused by electricity if tested to 35kV (dielectric test) and a 1m safety distance is adhered to.|
|Do not use on chip or fat pan fires.|
|How to Use|
|For fires involving solids, point the jet at the base of the flames and keep it moving across the area of the fire. Ensure that all areas of the fire are out. For fires involving liquids, do not aim the jet straight into the liquid. Where the liquid on fire is in a container, point the jet at the inside edge of the container or on a nearby surface above the burning liquid. Allow the foam to build up and flow across the liquid.|
|How it Works|
|They are mainly water based, with a foaming agent so that the foam can float on top of the burning liquid and break the interaction between the flames and the fuel surface.|
1. Any Inquiries will be replied within 24 hours
2. OEM/ODM available:1). Silk print logo on the product;
Company: YUYAO JINQIANG FIRE FIGHTING EQUIPMENT FACTORY
Add: Huajia Village,Huangjiabu Town,Yuyao City,Zhejiang Province ,China
Sales manager: Amy Fu
Contact Person: Amy Fu